Casio XJ-460 User Manual

DATA PROJECTOR XJ-460/XJ-560User’s Guide• Make sure you read all of the precautions in the printed “User’s Guide (Basic Operations)” first. Also see t

10Projection Operations2. Adjust the angle and position of the projector as required so the projected chart fits within the screen area. 3. Press the

Projection Operations113. Use the [W] and [X] keys to correct for keystoning.z Each press of [W] or [X] shifts the indicator on the currently selected

12Projection OperationsAuto Keystone CorrectionCertain operational environments and other factors can make it impossible to achieve sufficient accurac

Projection Operations13z The [COLOR MODE] key is disabled while the projector is connected to a computer over a USB connection (page 67). To select th

14Projection OperationsYou can use the remote controller’s zoom keys to enlarge a specific part of the projected image up to four times its original s

Projection Operations15While RGB is selected as the input source, you can display a sub-window that simultaneously displays the image being input thro

16Projection OperationsTo display the sub-window1. On the remote controller, press the [RGB] key to select RGB as the input source.z You can also sele

Projection Operations17To change the size of the sub-window While a sub-window is displayed, use the [D-ZOOM +] and [D-ZOOM –] keys to select one of t

18Projection OperationsUse the procedures in this section to display the pointer and to select its shape (arrow, bar). You can use the pointer to poin

Projection Operations19Selecting the Pointer ShapeEach press of the [POINTER/SELECT] key while the pointer is displayed cycles through the pointer sha

• Digital Light ProcessingTM, DLPTM, Digital Micromirror DeviceTM, and DMDTM are trademarks of Texas Instruments Incorporated of the United States.• M

20Projection OperationsTo operate the computer with the remote controller1. Use the mini D-Sub cable and USB cable that come with the projector to con

Using the Setup Menu21Using the Setup MenuPressing the [MENU] key while an image is being projected displays the setup menu on the projected image. Th

22Using the Setup Menu*6 This setting can be configured only when the input source is RGB/Component.*7 This setting can be configured only when the in

Using the Setup Menu23Before Configuring Menu SettingsAlways remember that the settings you configure on the setup menu are applied for the input sour

24Using the Setup MenuThis section explains projector operations you need to perform while configuring setup menu settings. It also provides details a

Using the Setup Menu254. Press the [ENTER] key.z This selects the top item in the sub-menu.5. Use the [S] and [T] keys to select the sub-menu item who

26Using the Setup MenuSub-menu OperationsThis section explains steps you need to perform in order to configure settings for each sub-menu item type (v

Using the Setup Menu27Setting Screen Type Sub-menu ItemThis type of sub-menu item displays a separate screen that you use to configure its settings.Ex

28Using the Setup MenuExecution Type Sub-menu ItemThis type of sub-menu item returns a setting to its initial default value.Examples: Image Adjustment

Using the Setup Menu29Initializing SettingsThe setup menu lets you initialize the settings of a particular main menu item, or for all setup menu items

Contents3Projection Operations ...4Projecting onto a Screen...

30Using the Setup MenuTo initialize all menu settingsz Performing the following procedure initializes all sub-menu items for all menus, except for the

Using the Setup Menu31This section provides detailed explanations about the contents for all of the setup menu items.z The titles in this section use

32Using the Setup Menu Image Adjustment J Color ModeThis sub-menu lets you select from among five different color settings to optimize projection in

Using the Setup Menu33Adjusting Color Balance by Selecting a Color Temperature ValueYou can use the procedure below to adjust color balance.Changing t

34Using the Setup Menu3. Use the [S] and [T] keys to select the color you want to adjust, and then use the [W] and [X] keys to adjust it. 4. After all

Using the Setup Menu35 Image Adjustment J Noise FilterThis sub-menu provides a choice of noise filter levels to remove digital noise from the project

36Using the Setup MenuScreen Settings Screen Settings J Vertical Keystone CorrectionThis sub-menu lets you correct for vertical keystoning of the pro

Using the Setup Menu37 Screen Settings J Aspect RatioThis sub-menu lets you select the aspect ratio (ratio between the vertical and horizontal dimens

38Using the Setup Menu Screen Settings J Resize Image to FitWhen RGB is selected as the input source and the video resolution of the connected comput

Using the Setup Menu39 Screen Settings J Projection ModeUse this sub-menu to specify whether projection will be from the front of the screen or the b

Projection Operations4Projectio n Operatio nsThis section explains operations that are related to projection of an image.Basic FlowProjecting onto a S

40Using the Setup Menu Screen Settings J Startup ScreenUse this sub-menu to specify whether or not a startup screen should be projected whenever the

Using the Setup Menu41 Screen Settings J Mute ScreenThis sub-menu lets you specify what should be projected during mute (page 13).Input Source Specif

42Using the Setup MenuInput Settings Input Settings J RGB InputThis sub-menu lets you specify the type of input signal in accordance with the device

Using the Setup Menu43Setting ExplanationsAuto: Select this setting to have the projector switch the video signal system automatically in accordance w

44Using the Setup Menu Input Settings J Signal Name IndicatorThis sub-menu lets you specify whether or not the name of the currently selected input s

Using the Setup Menu45 Input Settings J Restore Menu DefaultsThis sub-menu returns all of the sub-menu items on the Input Settings main menu to their

46Using the Setup Menu Option Settings1 J Auto AdjustThis sub-menu lets you specify whether or not auto adjustment should be performed (page 8) when

Using the Setup Menu47 Option Settings1 J Auto Power OffThis sub-menu lets you turn Auto Power Off (see “Turning Off the Projector” in the separate“U

48Using the Setup Menuz Besides the menu operation explained above, the following operations can also be used to turn off key lock.z While the project

Using the Setup Menu49Input Source Specific Menu Items Setting ExplanationOn: Turns on the power on password, which requires input of a password to tu

Projection Operations5Auto Input Source Selection When you turn on the projector, it checks the status of each input source (whether or not the input

50Using the Setup MenuTo display the power on password setting screen1. Perform steps 1 through 4 under “Basic Setup Menu Operations” on page 24. Sele

Using the Setup Menu513. Use the [W] and [X] keys to turn the power on password on or off.z Changing the power on password setting causes the message

52Using the Setup Menu Option Settings1 J Custom Logo SettingsWith this sub-menu, you can cut part of the projected screen and use it to create an or

Using the Setup Menu53To capture a custom logo1. Project the still image that you want to use as the custom logo.2. Perform steps 1 through 4 under “B

54Using the Setup Menu7. Use the cursor keys to move the cross cursor and draw the selection boundary.8. When the area you want to capture is enclosed

Using the Setup Menu55Configuring Custom Logo Capture SettingsBefore capturing a custom logo, configure the following settings to control its position

56Using the Setup MenuTo configure custom logo settings1. Perform steps 2 and 3 under “To capture a custom logo” on page 53 to display the custom logo

Using the Setup Menu57To initialize the custom logoz Initializing custom logo settings clears the currently registered custom logo and returns all of

58Using the Setup Menu Option Settings1 J LanguageThis sub-menu lets you specify the language to use for messages, setup menus, etc.Input Source Spec

Using the Setup Menu59 Option Settings1 J Restore Menu DefaultsThis sub-menu returns all of the sub-menu items on the Option Settings1 main menu to t

6Projection OperationsManually Selecting the Input SourceThe procedure you should use to select the input source depends on whether you are using proj

60Using the Setup Menu Option Settings2 J Power On AF/AK Mode You can specify either of two different auto adjustment operations to be performed when

Using the Setup Menu61 Option Settings2 J Zoom MemoryZoom memory lets you save the zoom setting when the projector is turned off, so it can be restor

62Using the Setup Menu Option Settings2 J Restore Menu DefaultsThis sub-menu returns all of the sub-menu items on the Option Settings2 main menu to t

Using the Setup Menu63 Operational Info J Scan SystemThis sub-menu item appears only when RGB or Component is the input signal, and shows the scannin

Appendix64AppendixWhen performing an operation on the remote controller, point it at the remote control signal port on the back or front of the projec

Appendix65z The allowable projection range is from 0.8 meter (2.62 feet) to 16.1 meters (52.82 feet), which is the distance from the surface of the le

66AppendixSome video devices are equipped with a component video output terminal. You can use an optionally available component video cable (YK-3) to

Appendix67After you connect a computer to the projector’s USB port, you can use the remote controller to perform computer mouse operations, and previo

68AppendixThe projector outputs images using XGA (1024 pixels × 768 pixels) video resolution. When the input signal from the computer connected to the

Appendix69Using the Password FeatureThe password feature lets you limit use of the projector to specific individuals. Note that the password feature i

Projection Operations7Zoom and FocusUse the [ZOOM] keys to adjust the image size, and the [FOCUS] keys to focus the image. To adjust image size 1. Hol

70Appendixz Always make sure that the projector has cooled sufficiently before cleaning it. If the projector is turned on, perform the following steps

Appendix71z Continued use of the projector after dust has accumulated around the intake vents can cause overheating of internal components and lead to

72Appendix2. Keeping the left nub (3) in the left depression (1), gently press the lens cover towards the right as you insert the nub (4) of the right

Appendix73The projector does not project any image from the connected device.The connected computer or video device may not be turned on, or it may no

74Appendixz Try performing the following steps, which can return the projector to normal operation.1. Press the [ ] (power) key to turn off the projec

Appendix75The following are the minimum Windows and Macintosh computer system requirements for USB connection with the projector. WindowsIBM PC/AT or

76AppendixRGB SignalSupported SignalsSignal Name ResolutionHorizontal Frequency (kHz)Vertical Frequency (Hz)VESA 640 × 350/85 640 × 350 37.9 85640

Appendix77Component SignalVideo/S-Video Signal* Listing of a device in the above table does not guarantee that you will be able to display its images

MA0505-B

8Projection OperationsAuto Adjustment of an RGB ImageWhen the input source is RGB (computer), the projector automatically adjusts vertical and horizon

Projection Operations9z The angles shown in the above illustration are subject to the following conditions. zProjection of an image from a computer (R