Casio XJ-S30 - XGA DLP Projector User's Guide download pdf (Page 31)

E-31

Troubleshooting

English

POWER

TEMP

LAMP

: Amber flashing 

Amber steady

: Red flashing

(1-second interval) 

Turns off

:–

Power has turned off automatically due to internal overheating.

Perform the following steps.

1 Check for any blocking of the projector’s intake vents and

exhaust vents, and make sure that there is sufficient space

around the projector. See

“Setup Precautions” (page E-15).

2 If there is dust accumulated around the intake vents and/or

exhaust vents, remove it. See

“Cleaning the Projector”

(page E-25).

If there is no problem with the projector’s vents, confirm that

the POWER/STANDBY indicator is lit amber (without flashing),

and then turn power back on again. If the error occurs again

when you turn power back on, contact your retailer or nearest

authorized CASIO Service Center.

Message : Internal temperature

is too high. The

projector will turn off.

POWER

TEMP

LAMP

: Amber flashing 

Red steady

: Red flashing (0.5-

second interval)

:–

Power has turned off automatically due to internal overheating.

This causes a dialog box containing the text in the next item

below to appear the next time you turn on the projector.

Follow the steps that are provided.

Message : –

POWER

TEMP

LAMP

: Green steady

:–

The last time you were using the projector, power turned off

automatically due to internal overheating. Press the [ESC] key

to clear the warning message and perform the following steps.

1 Check for any blocking of the projector’s intake vents and

exhaust vents, and make sure that there is sufficient space

around the projector. See

“Setup Precautions” (page E-15).

2 If there is dust accumulated around the intake vents and/or

exhaust vents, turn off the projector and remove it. See

“Cleaning the Projector” (page E-25).

3 Disconnect the power cord from the projector and wait for

all of the projector’s indicators to go out. Next, reconnect

the power cord and turn the projector back on. If the error

occurs again when you turn power back on, contact your

retailer or nearest authorized CASIO Service Center.

Message : The projector has a

history of turning off

due to high

temperature. Check

air vents for

blockage.

POWER

TEMP

LAMP

: Amber flashing 

Red steady

: Red steady

Power has turned off automatically due to a fan problem.

Confirm that the POWER/STANDBY indicator is lit red (without

flashing) and that the fan has stopped. After checking the

POWER/STANDBY indicator, disconnect the power cord from

the projector and wait for all of the projector’s indicators to go

out. Next, reconnect the power cord and turn projector power

back on.

If the error occurs again when you turn power back on,

contact your retailer or nearest authorized CASIO Service

Center.

Message : There is a problem

with the fan. The

projector will turn off.

Indicator/Error Message Description and Required Action

XJS30_S35_Kihon_E.book 31 ページ２００６年６月３０日　金曜日　午前１１時１３分

Downloaded From projector-manual.com Casio Manuals

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 37

Comments to this Manuals

No comments

Casio XJ-S30 - XGA DLP Projector User's Guide Page 31

Comments to this Manuals

Related products and manuals for Projectors Casio XJ-S30 - XGA DLP Projector