Casio XJ-UT310WN Network Function Guide User Manual download pdf (Page 22)

To use a user SSID to establish a wireless LAN connection and

project

Projector Operation

Connect the wireless adapter to the projector (page 10) and then turn on the

projector.

z The input source will automatically switch to “Network” and projection of the LAN connection

standby screen will start.

z If projection of the LAN connection standby screen does not start, press the [INPUT] key. On

the “Input” dialog box that appears, use the [T] and [S] keys to select “Network” and then

press the [ENTER] key.

Select the user SSID you created with the procedure under “To create a user

SSID” (page 19).

Press the [ESC] key twice to return to “Network Settings”.

Use the [T] key to select “Update Network Settings” and then press the [ENTER]

key.

z This will display a confirmation dialog box asking if you want to update network settings.

Press the [S] key to select “Yes”, and then press the [ENTER] key.

z This applies the SSID change to the projector and closes the dialog box. Wait until the LAN

connection standby screen starts to be projected again.

In this case: Perform this operation:

Projector SSID was not changed after you performed

the operation under “To create a user SSID” (page

19).

Advance directly to step 6.

Projector SSID was changed to a different one after

you perform the operation under “To create a user

SSID” (page 19).

Press the [MENU] key and then select the following:

“Network Settings” 3 “Projector Wireless LAN

Settings” 3 “SSID”. On the dialog box that appears,

select the user SSID.

1 ... 21 22 23 ... 79

No comments

Casio XJ-UT310WN Network Function Guide User Manual Page 22