Casio WK-245 User Manual

CTK-4400/WK-240/WK-245/CTK-860INMIDI ImplementationCASIO COMPUTER CO., LTD.ContentsI MIDI Message Overview 51 Product Configuration as a MIDI Device 51

9.3 Data Entry (06H,26H)Message Format: BnH 06H mmH (MSB)BnH 26H llH (LSB)n: MIDI Channel Numbermm: MSB Valuell: LSB ValueSend Sent when there is a ch

9.7 Hold1 (40H)Message Format: BnH 40H vvHn: MIDI Channel Numbervv: Value (Note1)Note1 : For information about the relationship between setting values

9.10 Reverb Send (5BH)Message Format: BnH 5BH vvHn: MIDI Channel Numbervv: ValueSend Sent when auto accompaniment is used.Receive Receipt changes the

9.13.1 Pitch Bend SensitivityMessage Format: BnH 64H 00HBnH 65H 00HBnH 06H mmHBnH 26H llHn: MIDI Channel Numbermm: MSB Value(00H - 0CH)ll: LSB Value(S

Send Sent when an RPN message send operation is performed.Receive Receipt de-selects RPN.10 Mode Message10.1 All Sound Off (78H)Message Format: BnH 78H

Send This message is not sent by this Instrument.Receive Receipt performs the same operation as when All Notes Off is received.10.6 Mono (7EH)Message F

12 Channel After TouchMessage Format: DnH vvHn: MIDI Channel Numbervv: ValueSend This message is not sent by this Instrument.Receive Receipt adds, to

Part IIISystem Message14 Timing ClockMessage Format: F8HSend Sent when auto accompaniment is used.Receive This message is not received by this Instrum

18.1 Universal Real Time System Exclusive MessageMessage Format: F0H 7FH...F7H18.1.1 Master VolumeMessage Format: F0H 7FH 7FH 04H 01H llH mmH F7Hll:

Receive Receipt changes the Reverb Type or the Virtual Hall function state.18.1.5 Reverb TimeMessage Format: F0H 7FH 7FH 04H 05H 01H 01H 01H 01H 01H 0

9.8 Sostenuto (42H) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119.9 Soft (43H) . . . . . . . . . . . . . . . .

Receive Receipt changes the sound source setting to the Instrument presetting.18.1.10 GM2 System OnMessage Format: F0H 7EH 7FH 09H 03H F7HSend This me

Part IVInstrument-Specific System ExclusiveMessages19 FormatThis section explains the format of the Instrument-specific System Exclusive Messages. See “

19.2 Basic Message StructureInstrument-sp ecific system exclusive message operation can be broadly divided between two methods:Individual Parameter Tra

19.3.4 dev : MIDI Device ID 00H - 7FHFormat: 0dddddddBThe contents of this field in a received message are compared with the Model’s MIDI Device ID, an

HBR:Handshake Bulk Parameter Set Request Indicates a send request message using the pa-rameter set image handshake mode. When the Instrument receives

Category TransferID (c) Parameter Set Individual Parameter One-way Bulk Handshake Bulk00H System A - -02H Patch A - -03H Tone A A A06H Drum A A A0DH I

Block Bit Field Division When the parameter block has a multi-dimensional array structure, bit 21of the block number is divided into prescribed bit fie

19.3.13 len : Data LengthFormat: LSB 0lllllllBMSB 0mmmmmmmBAs shown below, the meaning of this field differs depending on whether an individual transfer

19.3.15 Single Parameter Data Size LimitWith the Instrument’s system exclusive message format, the size of a single message cannot exceed 256bytes. Th

19.3.18 EOX : End of System Exclusive MessageFormat: 11110111BThis is the End of System Exclusive Message status byte established by the MIDI standard

20 Individual Parameter Operations 2921 Parameter Set Transfer 2921.1 Communication Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Session “One session” refers to a series of processes that occur for one user operation. One subsessionor multiple subsessions make up a session. The

Data Receiver Data Sender Operation(External Device) (This Instrument)HBR -----> Send Request(Optional)<----- HBS Data SendACK -----> Acknowl

Data Receiver Data Sender Operation(External Device) (This Instrument)HBR -----> Send Request(Optional)<----- HBS Data SendACK -----> Acknowl

Data Receiver Data Sender Operation(External Device) (This Instrument)HBR -----> Send Request(Optional)ACK -----> Acknowledge<----- HBS Data

Part VParameter ListThis section explains the parameters that actually can be transferred by the Instrument.22 Using the Parameter List• Parameter fiel

23.2 Data Management ParameterThese are information acquisition and operation command parameters for this Instrument’s Data Man-ager PC application.Pa

24 Patch ParameterThe main function of patch parameters is to configure the settings of the sound source of a device.24.1 Master Tune ParameterThese pa

26 All Data ParameterThere is no parameter for storing all data directory information.27 Sequence Parameter27.1 Sequence Directory InfoThe sequence pa

Part VIParameter Set ListThis section explains actually how parameter sets can be transferred by the Instrument with bulk dump.32 Parameter Set TableP

• pset fieldShows the parameter set number value. Applicable parameter set numbers are those in the user areawhere the top number is zero, and are not

VII Setting Values and Send/ Receive Values 4033 Setting Value Tables 4033.1 Off/On Setting Value Table . . . . . . . . . . . . . . . . . . . . . . . .

Part VIISetting Values and Send/ Receive Values33 Setting Value Tables33.1 Off/On Setting Value TableTransmit Value Receive Value Parameter00H 00H - 3F

33.5 Reverb Type Setting Value TableTransmit Value Receive Value Parameter00H 00H Off01H 01H Reverb 102H 02H Reverb 203H 03H Reverb 304H 04H Reverb 40

Part VIIIMIDI Implementation Notation34 Value Notation34.1 Hexadecimal NotationMIDI implementation sometimes requires that data be expressed in hexade

Decimal Hexadecimal Binary0 00H 00000000B1 01H 00000001B2 02H 00000010B3 03H 00000011B4 04H 00000100B5 05H 00000101B6 06H 00000110B7 07H 00000111B8 08

Part IMIDI Message Overview1 Product Configuration as a MIDI DeviceAs a MIDI device, this Instrument consists of the System Section, Performance Contro

1.3.2 Instrument Part BlockThe instrument part section consists of a total of 32 instrument parts, divided into two groups, namedGroup A and Group B o

operation mode. For details, see the explanation for each message.3 Conditions that Disable Message Send and ReceiveAll MIDI message send and receive

Part IIChannel Message4 Receive ChannelThe channel number of the channel message received by each part is shown in the table under “1.3.2Instrument Pa

Send This message is not sent by this Instrument.Receive This message is not received by this Instrument.9 Control ChangeMessage Format: BnH ccH vvHn: