Casio EX-Z60 Owner's Manual Page 205

  • Download
  • Add to my manuals
  • Print
  • Page
    / 256
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 204
VIEWING IMAGES ON A COMPUTER
205
3.
Press the camera’s power button to turn it on,
and then press its [MENU] button.
4.
Select the “Set Up” tab, select “USB”, and
then press [].
5.
Use [] and [] to select “Mass Storage (USB
DIRECT-PRINT)”, and then press [SET].
6.
Turn off the camera.
7.
Place the camera onto the USB cradle.
Do not place the camera onto the USB cradle while it
is turned on.
8.
Press the USB cradle’s [USB] button.
This will cause your computer to create a hardware
profile for camera’s built-in memory or the memory
card loaded in the camera. You do not need to install
the USB driver every time. After you install it once,
your computer will recognize the camera’s built-in
memory or its memory card when you establish a
USB connection between the camera and your
computer.
Pressing the [USB] button enters the USB mode,
which causes the USB cradle’s [USB] lamp to light
green (page 240).
At this point, some operating systems will display a
“Removable Disk” dialog box. If your operating
system does, close the dialog box.
[USB] button
[USB] lamp
Page view 204
1 2 ... 200 201 202 203 204 205 206 207 208 209 210 ... 255 256

Comments to this Manuals

No comments