Casio Cassiopeia EG-800 Specifications Page 47
- Page / 89
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
— 44 —
8-2-2. Direct Installation in Only D-RAM in the unit without CF card
Using the following procedure, you can directly install the diagnostic program in D-RAM in the unit
without CF card.
1. Perform 2~9 in the procedure of 8-2-1.
2. Clicking Windows holder in ActiveSync 3.1 program, open this holder.
3. Enter both CASIO_JXdiag.exe and diagboot.exe files into this holder.
4. Doing so, the installation of the diagnostic program to D-RAM in the unit starts automatically.
* Once the diagnostic program is installed in D-RAM in the unit, this program is not deleted even if
RESET operation is performed.
5. Performing the following operation with the unit, confirm that the diagnostic program has been
installed in D-RAM in the unit.
Tapping Start, Programs, File Explore, My documents, My Device, and then Windows holder
using a stylus, CASIO_JXdiag icon will appear in Windows holder.
If CASIO_JXdiag icon appears, the diagnostic program is installed in D-RAM.
Tapping this CASIO_JXdiag icon, Main Menu for this Operation Check display appears.
Operation Check can be booted using above operation also.
8-3. How to delete the diagnostic program
If necessary, delete the diagnostic program in CF card and D-RAM in the unit using the following procedure.
8-3-1. How to delete the diagnostic program in CF card
1. After connecting the unit set CF card and PC using ActiveSync 3.1, be sure to delete both
diag.exe file in casioconfidential holder and diagboot.exe file in diag holder.
Never delete jx590diag, casioconfidential or diag holder. Be sure to delete exe files firstly.
Refer to 8-2-1 concerning above connection for detail.
2. Performing the following operation with the unit, confirm that the diagnostic program has been
deleted in CF card according to the following procedure.
Tapping Start, Programs, File Explore, My documents, My Device, Storage Card, jx590diag,
and then casioconfidential using a stylus, diag icon will disappear.
If diag icon disappears, the diagnostic program in CF card is deleted.
Confirm that diagboot icon in diag holder with the unit disappears also.
8-3-2. How to delete the diagnostic program in D-RAM in the unit
There are two ways to delete the diagnostic program in D-RAM.
1. After connecting the unit and PC using ActiveSync 3.1, delete CASIO_JXdiag.exe file in Windows
holder.
Refer to 8-2-1 concerning above connection for detail.
2. Perform FULL RESET for the unit.
To perform FULL RESET, press RESET button while holding down Power button, then operate the
unit according to the messages on the screen.
* Performing the following operation with the unit, confirm that the diagnostic program has been
deleted in D-RAM in the unit.
Tapping Start, Programs, File Explore, My documents, My Device, and then Windows using a
stylus, CASIO_JXdiag icon will disappear in Windows holder.
If CASIO_JXdiag icon disappears, the diagnostic program in D-RAM is deleted.
- EG-800 (JX-590A) 1
- CONTENTS 2
- 1. MAIN FEATURES 4
- 2. SPECIFICATIONS 5
- × 320 dots 5
- EG-800EG-800 6
- 3. UNPACKING 7
- 4.1. General Guide 10
- About the [Action] Control 11
- Attaching the Strap 12
- Using the Stylus 13
- Adjusting Display Contrast 14
- Adjusting Display Brightness 14
- Power Requirements 14
- Using a CompactFlash Card 16
- Infrared Communications 18
- Direct Connection 19
- Cradle Connection 19
- AC power cord 20
- DC power cord 21
- AC adapter 22
- USB cable 22
- USB port 22
- Serial cable 23
- Serial port 23
- Important 24
- Serial cable (20-pin) 25
- 4-2. Initial Setup 29
- Quick Start Guide 30
- Resetting the Unit 31
- Memory Error Message 31
- Performing a Full Reset 32
- 5-2. Battery Replacement 33
- 6. DATA COMMUNICATIONS 35
- 6-3. Avtivesync 3.1 36
- 6-5. Card Backup Tool 36
- 6-6. Mobile communication 42
- Mail Setup Tool 42
- 6-7. Infrared Communication 43
- 7. ADUSTMENT 44
- 8. OPERATION CHECK 45
- 8-4. Operation Check 48
- ** MEMORY ** 49
- ----- END 55
- 9. TROUBLE SHOOTING 56
- 10. CIRCUIT BLOCK DIAGRAM 58
- 11. WIRING DIAGRAM 59
- 12. SCHEMATIC DIAGRAMS 60
- TYP-15.5V 61
- 12-1. Main block (3/3) 62
- 12-2. Key block 63
- 12-3. Reset Switch block 64
- 12-4 Jack block 65
- 12-5. Flash ROM board 66
- 12-6 Sub block 67
- 13. PCB VIEW 68
- Key PC Board 71
- 14. DISASSEMBLY PROCEDURE 72
- In case of CN9: 74
- PARTS PRICE LIST 78
- 16. EXPLODED VIEW 81
- 16-2. PCB ASSY/MAIN 82
- 16-3. PCB ASSY/KEY 83
- 16-4. INNER CASE UNIT (1/2) 84
- 16-4. INNER CASE UNIT (2/2) 85
- 16-5. PCB ASSY/SWITCH 86
- 16-6. LOWER CASE ASSY 87
- 16-7. OTHERS 88
- CASIO TECHNO CO.,LTD 89
Related products and manuals for Handheld mobile computers Casio Cassiopeia EG-800
(89 pages)© 2020, manymanuals.com. All rights reserved. | 1.027 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals