Casio DV-01 Owner's Manual Page 10

  • Download
  • Add to my manuals
  • Print
  • Page
    / 32
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 9
37
RECORDING
RECORDING
Using the Shutter Button
The following steps describe how to operate the shutter but-
ton so that Auto Focus has a chance to focus the image.
1.
Press the shutter button about half way.
The Auto Focus feature automatically focuses the im-
age.
2.
Press the shutter button as far as it will go to
record the image.
P
O
W
E
R
O
N
/
O
F
F
REC PLAY
Basic Recording Operation
The following describes the basic operation for recording
images.
1.
Slide the Function
Switch to REC.
The REC position selects the Record Mode, while
PLAY selects the Playback Mode.
2.
Rotate the dial so its
(normal recording)
setting is aligned with
the dot on the top of the
camera.
You can perform step 2 before step 1, if you want.
3.
Slide the POWER Switch
in the direction indicated
by the arrow.
38
RECORDING
The POWER Switch returns to its original position
when you release it.
Turning on power enters the normal Recording Mode.
If power turns off, slide the POWER Switch again to
turn it back on.
4.
After composing the image on the monitor
screen, press the shutter button about half
way and hold it there.
The camera’s Auto Focus feature automatically fo-
cuses the image.
The operation indicator lights green and the Auto Fo-
cus Frame in the monitor screen turns green when the
Auto Focus operation is complete.
Take care to avoid blocking the lens, distance sensor
or light sensor with your fingers.
IMPORTANT!
Auto Focus tends not to work well with the following
types of subjects.
Solid color walls or objects with little contrast
Strongly backlit objects
Polished metal or other brightly reflective objects
• Venetian blinds or other horizontally repeating pat-
terns
• Multiple images that are varying distances from the
camera
Subjects in poorly lit areas
Closeup images recorded using digital zoom
These cases may make it impossible for Auto Focus to focus
properly, which is indicated by the operation indicator and
the Auto Focus Frame inside the monitor screen remaining
red. When this happens switch to the Manual Mode for fo-
cusing (page 49).
Carefully press the shutter button, taking care not to
move the camera as you do.
WT
NO!
39
RECORDING
5.
After confirming that the Auto Focus operation
is complete (operation indicator is green),
press the shutter button all the way down to
record the image.
Pressing the shutter button releases the shutter, even
if Auto Focus was unsuccessful and the image is out
of focus.
Images you record are stored in the CAMERA folder.
See page 84 for information about how you can
change to another folder to store images.
Note that you can also select a memory card folder into
which recorded images should be placed (page 84).
CAUTION
• Never open the battery compartment cover, discon-
nect the AC adaptor from the camera, or unplug the
adaptor from the wall socket while the operation indi-
cator is flashing green. Doing so will not only make
storage of the current image impossible, it can also
corrupt other image data already stored in camera
memory.
• Fluorescent lighting actually flickers at a frequency
that cannot be detected by the human eye. When us-
ing the camera indoors under such lighting, you may
experience some brightness or color problems with
recorded images.
40
RECORDING
Using Focus Lock
Normally, Auto Focus automatically focuses on the object
that is inside the Auto Focus Frame. Focus lock is a tech-
nique that lets you lock the focus on a subject and then move
the camera so the Auto Focus Frame is pointed at another
subject when you record. This keeps the original subject in
focus, even though a different object is within the Auto Focus
Frame.
• The Auto Focus Frame is shown on the monitor screen
only while the shutter button is being held half way down.
Locking the focus also locks the exposure setting.
1.
Align the Auto Focus
Frame with the subject
you want to lock on and
press the shutter button
half way down.
The Auto Focus frame turns
green when the image is in
focus.
2.
While keeping the shut-
ter button depressed
half way, move the cam-
era and compose the im-
age as you want.
3.
Press the shutter button all the way down to
record the image.
Page view 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 31 32

Comments to this Manuals

No comments