Casio DV-01 Owner's Manual download pdf (Page 25)

CONNECTIONS

• Computer (page 101)

• QV Color Printer

(page 100)

DIGITAL Terminal

IMPORTANT!

• Be sure to turn off both the camera and other equip-

ment before making any connections.

• Check the documentation that comes with your other

equipment for information you may need to know

when making connections.

• Leaving the same image displayed on a television or

computer display screen for very long periods can

cause the image to be “burned in” on the screen. When

this happens, a faint after-image remains on the

screen, even after you disconnect the camera. To avoid

this, you should not leave the same image displayed on

such a screen for very long periods.

• This camera does not support cable transfer of data

with other CASIO digital cameras.

Cables

The type of cable you

should use depends on

the type of equipment

to which you are

connecting.

DIGITAL

Terminal

INPUT

VIDEO

AUDIO

Accessory video cable

VIDEO OUT

terminal

VIDEO IN terminal

Selecting the Video Output Signal Mode

You can select either of two common video output modes:

NTSC or PAL.

The video system you should use depends on the country

where you plan to use the output signal. In the United States

or Japan, for example, you should use NTSC, but in Europe

you need to use PAL.

Check with your local video or TV retailer if you are unsure

about which video mode you should use in your country.

To Connect to a Television

You can playback images in camera memory on the screen

of a connected television.

CONNECTING TO OTHER EQUIPMENT

Connect one end of the video cable to the cam-

era and the other end to the television.

Set up the television for video input.

• See the documentation that comes with the television

for information about how to do this.

Use the operations under “Playback” on page

67 to playback images on the television screen.

IMPORTANT!

• A television must have a video input terminal like the

one shown in the illustration to connect to this camera.

• Battery capacity (page 29) and other displays that nor-

mally appear on the camera’s monitor screen are also

displayed on the television screen.

• The monitor screen goes blank as soon as you con-

nect the video cable to the camera.

To Change the Video Output Mode

Slide the Function Switch to PLAY.

Press MENU.

Use [+] and [–] to select

SETUP, and then press

the shutter button.

CONNECTING TO OTHER EQUIPMENT

Use [+] and [–] to select

VIDEO OUT, and then

press the shutter button.

Use [+] and [–] to select the video mode you

want to use, and then press the shutter button.

100

CONNECTING TO OTHER EQUIPMENT

Connect one end of the cable that comes with

the QV Color Printer to the camera and the

other end to the printer.

Slide the camera’s Function Switch to PLAY

and then turn on camera power.

Perform the QV Color Printer operations re-

quired for printing.

• See the documentation that comes with the QV Color

Printer for details.

• Performing a print operation for a movie prints the 4 or

16 individual frames that make up the movie.

• Printing a panorama prints the individual images that

make up the panorama.

To Connect to a QV Color Printer

You can use a QV Color Printer to produce printouts of your

image data.

Supported Printer Models: DP-300, DP-8000

DIGITAL COMMUNICATION

Data communication cable

DIGITAL terminal

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 31 32

Comments to this Manuals

No comments

Casio DV-01 Owner's Manual Page 25

Comments to this Manuals

Related products and manuals for MP3/MP4 players Casio DV-01