Casio IT-500 User's Guide download pdf (Page 35)

E-33

Performing a Full Reset (Initialization)

Performing a full reset initializes memory. This means that all data stored in the

memory (RAM) is deleted and all the settings are returned to their initial factory

defaults.

Perform a full reset whenever any one of the following conditions exists.

• When you want to delete all memory contents and return the settings to their initial

factory defaults.

• When you are no longer able to use the Handheld Terminal because you forgot your

password.

• When the Handheld Terminal does not operate normally due to a memory problem.

• When the message “A problem with memory contents has been found. ...” appears.

To perform a full reset

Important!

Performing a full reset deletes all data currently stored in the memory (RAM). If

possible, backup data of the Handheld Terminal to a computer, Flash Memory, a

memory card, or some other medium before performing a full reset.

1. Hold down the power key and push down the reset switch for about one second, until

the message shown below appears on the display.

• To cancel the full reset operation, press the CLR key.

2. Press the Trigger key. This causes the message shown below to appear.

• To cancel the full reset operation, press the CLR key.

3. Press the Trigger key again.

• Full reset is performed, all data in the memory (RAM) are erased and the start-up

screen is displayed.

Memory All Clear Warning

Proceeding with this operation deletes all data

stored in memory.

Press [Trigger key] to proceed

or [CLR key] to cancel.

Trigger

key

Memory All Clear Warning

Proceeding with this operation initializes memory.

Press [Trigger key] to proceed

or [CLR key] to cancel.

Trigger

key

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 57 58

No comments

Casio IT-500 User's Guide Page 35