Casio XJ-H1650 User Manual download pdf (Page 17)

E-15

Starting and Stopping Projection

1. Use the bundled AC power cord to plug the projector into a power outlet.

NOTE

z This product is also designed for IT power distribution system with phase-to-phase voltage 230V.

2. Turn on the computer that is connected to the projector.

3. If the projector lens cover is covering the lens, remove it.

z XJ-H1600/XJ-H1650/XJ-H1700/XJ-H1750: Insert your fingers into its recesses and squeeze

towards the middle.

z XJ-ST145/XJ-ST155: The lens cover is held on by magnetic force, so simply pull to release it.

4. Press the [P] (Power) key.

z The first time you turn on the projector, a “Language” window will appear in the center of the

projection screen. Select the language you want.

5. Select the input source

z Press the [INPUT] key to display a list of input sources. Use the [T] and [S] keys to select the

projector terminal (Computer 1 or Computer 2) where the RGB output from the computer is

connected. Finally, press the [ENTER] key.

6. Use the zoom ring of the projector’s lens to adjust the size of the projected image

(XJ-H1600, XJ-H1650, XJ-H1700 and XJ-H1750 only).

7. Use the focus ring to adjust the focus.

NOTE

z The projector has a keystone correction feature that

prevents distortion of the projected image when projecting

from an angle. The projector detects when it is at a vertical

angle to the screen and performs keystone correction

automatically.

You can use the [KEYSTONE +] and [KEYSTONE –] keys to

adjust keystone correction manually.

1. Press the [P] (Power) key.

z This causes the confirmation message to appear. If you do not turn off the projector the

confirmation message will disappear automatically after about 10 seconds. The confirmation

message will also disappear if you press the [ESC] key.

2. To turn off the projector, press the [P] (Power) key again in response to the

confirmation message.

3. After checking to make sure that the POWER/STANDBY indicator has stopped

flashing amber and remains lit, unplug the AC power cord from the power outlet.

To start projection

To turn off the projector

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 25 26

No comments

Casio XJ-H1650 User Manual Page 17