Casio XJ-H1650 User Manual download pdf (Page 20)

E-18

Troubleshooting

Check the following items whenever you experience any problem with the projector.

Problem Cause and Recommended Action

Power does not turn

on.

z If the POWER/STANDBY indicator is not lit, the AC power cord is not

connected correctly. Connect the AC power cord correctly.

z If the TEMP or LIGHT indicator remains flashing or lit, it means some type

of error has occurred. See “Error Indicators and Warning Messages” in the

User’s Guide (UsersGuide_English.pdf).

No image is projected

or the projected image

is abnormal.

z The computer or video device connected to the projector is not turned on

or it is not outputting a video signal. Make sure the connected computer or

video device is turned on, and perform the required operation on it to

output a video signal.

z The correct output source is not selected on the projector. On the

projector, select the correct input source that corresponds to the

connected device.

z Images may not project correctly when you have the component output

terminal of a video device connected to the COMPUTER IN (1 or 2)

terminal of the projector. Connect to the VIDEO terminal or S-VIDEO

terminal of the projector.

Image color or display

is very abnormal.

The wrong option (“Component” or “RGB”) may be selected for the “Input

Settings J COMPUTER 1 terminal (or COMPUTER 2 terminal)” setting on the

setup menu. The image will not be projected correctly if “Component” is

selected while the projector’s COMPUTER IN (1 or 2) terminal is connected to

the RGB output terminal of a computer, or if “RGB” is selected while the

projector’s COMPUTER IN (1 or 2) terminal is connected to the component

video output terminal of a video device. On the setup menu, select “Auto” for

the “Input Settings J COMPUTER 1 terminal (or COMPUTER 2 terminal)”

setting. See the User’s Guide (UsersGuide_English.pdf).

I can’t understand

messages or menus

because they are the

wrong language.

Perform the following operation to select the language you want. See the

User’s Guide (UsersGuide_English.pdf).

1. Press the [MENU] key to display the setup menu.

2. If the input signal is HDMI, press [T] four times and then press the

[ENTER] key. If the input signal is not HDMI, press [T] five times and then

press the [ENTER] key.

3. Press [S] twice and then press the [ENTER] key to display the language

selection menu.

4. Use the [T] and [S] keys to move the highlighting to the language you

want to select and then press the [ENTER] key.

5. Press the [MENU] key to exit the setup menu.

No sound z The projector’s volume level setting may be too low or muted. Press the

remote controller [VOLUME] key and then use [T] and [S] to adjust the

volume level. See the User’s Guide (UsersGuide_English.pdf).

z The volume level setting of the device connected to the projector is too low

or the other device is not outputting audio. Adjust the volume level of the

connected device.

z The audio output of the connected device may not be connected correctly

to the projector’s AUDIO IN (1 or 2) terminal or AUDIO IN L/R terminal.

Check the connection, referring to one of the following (depending on the

type of connected device): “Connecting a Computer to the Projector” in

this manual or “Connecting to a Video Device” in the User’s Guide

(UsersGuide_English.pdf)

z “Line” is selected for the setup menu “Option Settings 2 J Audio Out”

setting. Change the “Audio Out” setting to “Speaker”. See the User’s

Guide (UsersGuide_English.pdf).

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26

Comments to this Manuals

No comments

Casio XJ-H1650 User Manual Page 20

Comments to this Manuals

Related products and manuals for Projectors Casio XJ-H1650