158
Appendix
1. Before opening the battery cover, carefully wipe any sand or moisture
from the camera to ensure that none of it gets inside the battery
compartment.
2. Open the battery cover and remove
the current battery.
With the monitor screen side of the
camera facing upwards, slide the stopper
in the direction indicated by the arrow in
the illustration. After the battery pops out,
pull it the rest of the way out of the
camera.
3. Load a new battery.
IMPORTANT!
• Never open the battery cover in an area where water is present. Doing so creates
the risk of water getting inside the camera, resulting in unrepairable damage.
. Precautions during Use
• Operation provided by a battery under cold conditions is always less than operation
under normal temperatures. This is due to the characteristics of the battery, not the
camera.
• Charge the battery in an area where the temperature is within the range of 5°C to
35°C (41°F to 95°F). Outside this temperature range charging can take longer than
normal or even fail.
• Do not tear or remove the battery outer label.
• If a battery provides only very limited operation following a full charge, it probably
means the battery has reached the end of its service life. Replace the battery with a
new one.
To replace the battery
Battery Precautions
Stopper
Comments to this Manuals