Casio EX-ZR50 Owner's Manual download pdf (Page 21)

Quick Start Basics

IMPORTANT!

• A battery that has not been used for a long time, or ambient temperature extremes

can cause charging to take longer than normal. If charging takes longer than about

five hours, a timer will terminate it automatically, even if the battery is not fully

charged. This is indicated by the back lamp flashing red. If the battery has not been

used for a very long time, charging may be terminated automatically and the back

lamp may start flashing red after only about 60 minutes. In either case, disconnect

the USB cable from the camera and then reconnect it to resume charging.

• Make sure that you insert the cable connector into the [USB] port until you feel it

click securely into place. Failure to insert the connector fully can result in poor

communication or malfunction.

• Note that even while the connector is fully inserted, you

still will be able to see the metal part of the connector as

shown in the illustration.

• Pressing [ON/OFF] (Power) while the USB-AC adaptor is

connected to the camera will turn on the camera with

power being supplied by the battery. Because of this,

charging will stop.

• The USB-AC adaptor will become warm during charging.

This is normal and does not indicate malfunction.

• The shape of the power plug depends on each country or geographic area.

Back Lamp Operation

Lamp Status Description

Lit Red Charging

Flashing Red

Abnormal ambient temperature,

USB-AC adaptor problem, or battery

problem (page 195)

Off Charging complete

Back lamp

1 ... 20 21 22 ... 215

No comments

Casio EX-ZR50 Owner's Manual Page 21