Casio FA-123 User Manual download pdf (Page 3)

19990401

10-2-1

Connecting the Unit with a CASIO Label Printer

10-2 Connecting the Unit with a CASIO Label

Printer

After you connect the unit to a CASIO Label Printer with cable, you can use the Label Printer

to print screen shot data from the unit (see 10-6 Sending a Screen Shot). See the user’s

guide that comes with your Label Printer for details on how to perform this operation.

• The operation described above can be performed using the following Label Printer

models: KL-2000, KL-2700, KL-8200, KL-8700 (as of February 1999).

uTo connect the unit to a Label Printer

1. Check to make sure that the power of the unit and the Label Printer is off.

2. Connect the cable to the Label Printer.

3. Remove the cover from the connector of the unit.

4. Connect the other end of the cable to the unit.

5. Turn on the power of the unit, followed by the Label Printer.

•After you finish data communications, turn off power in the sequence: the unit first, and

then the Label Printer. Finally, disconnect the equipment.

Label Printer

Cable

#Be sure you keep the connector cover in a

safe place so you can replace it after you

finish your data communications.

1 2 3 4 ... 22

No comments

Casio FA-123 User Manual Page 3