Casio DT-X5 Series User Manual download pdf (Page 54)

E-52

Using the Bridge Satellite Cradle (HA-A61IO)/Bridge Basic Cradle (HA-A60IO)

5. Making sure that their two IR ports come into contact with each other, place the

Handheld Terminal onto the Bridge Satellite Cradle. This causes the Bridge Satellite

Cradle power indicator lamp to light in green.

• If the system is operating normally and the communication is enabled, the system

status indicator lamp lights in green.

• The communication indicator lamp flashes in green when the communication starts.

When charging is initiated, Indicator 1 on the Handheld Terminal lights up in red. When

charging has been completed, Indicator 1 on the Handheld Terminal changes color from

red to green.

Important!

• A high-sensitivity communication element is used during IR communication.

In order to ensure successful communication, avoid using cellular phones or other

devices that emit radio wave in the area where you are performing IR

communication.

If you need to use such a device, move away from the communicating Handheld

Terminals. In case of a cellular phone, keep it at least 30cm (

⁄⁄

⁄

") away.

• Take care to avoid allowing the Bridge Satellite Cradle/Bridge Basic Cradle

power contacts to become connected to each other, which creates a short.

Shorting the power contacts can damage the Bridge Satellite Cradle/Bridge Basic

Cradle.

DT-X5_E_P49_58.p65 04.7.14, 6:05 PM52

1 ... 53 54 55 ... 73

No comments

Casio DT-X5 Series User Manual Page 54