Casio XJ-450 User's Guide download pdf (Page 45)

Getting Ready

2. To turn off the projector, press the [ ] (power) key again in response

to the confirmation message.

z This causes the projector lamp to go out and stops projection.

z Also the POWER/STANDBY indicator starts to flash amber, which indicates that the

projector is cooling down. It takes about 120 seconds from the start of cool down until

the projector turns off.

z The projector will not turn back on again while it is cooling down.

z After cool down is finished, the POWER/STANDBY indicator on the top of the projector

will light amber, which indicates the standby state. You can now turn the projector back

on, if you want.

3. After confirming that cool down is complete, unplug the AC power cord

from the power outlet.

z Note that the projector may still be quite warm even after it completes its cool down

procedure. Before packing up the projector, it is recommended that you check to make

sure that the fan is stopped and that the projector is no longer warm.

z This causes the POWER/STANDBY indicator to go out.

4. After ensuring that the projector and the connected computer or video

device are turned off, disconnect the connecting cables from the

projector and the connected device.

5. Close the front cover.

Auto Power Off

Auto Power Off automatically turns off the projector whenever there is no input signal from

the currently selected input source, and no operation is performed on the projector for about

10 minutes.

When Auto Power Off is triggered, the projector first enters a cool down state, the same as

it does when you press the [ ] (power) key to turn it off.

z The POWER/STANDBY indicator flashes amber to indicate that the projector is cooling

down. It takes about 120 seconds from the start of cool down until the projector turns off.

z The projector will not turn back on again while it is cooling down.

z After cool down is finished, the POWER/STANDBY indicator on the top of the projector to

lights amber, which indicates the standby state. You can now turn the projector back on,

if you want.

z You can turn off Auto Power Off, if you want. See “Option Settings1 J Auto Power Off”

on page 94.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 129 130

No comments

Casio XJ-450 User's Guide Page 45