Casio XJ-460 User Manual download pdf (Page 12)

Projection Operations

Auto Keystone Correction

Certain operational environments and other factors can make it impossible to achieve sufficient

accuracy when performing keystone correction.

If an image appears distorted after performing auto keystone correction check the sensors for

dirt and clean them if necessary. See page 70 for more information.

If this does not solve the problem, try changing the position of the projector slightly or

perform manual keystone correction.

AF/AK at Short Projection Distances

Performing the AF/AK (Auto Focus, auto keystone correction) operation when there is sharp

angle and when there is only a short distance between the projector and screen can result in

the left and right edges of the image to be out of focus. If this happens, reduce the angle or

increase the distance between the projector and screen.

The color mode setting lets you specify the type of image you will be projecting, so the

projector can optimize image color.

To change the color mode setting

1. Press the [COLOR MODE] key.

z This causes the color mode screen to appear on the projection image. The

mark

indicates the current color mode setting.

z For details about each of the settings, see “Image Adjustment J Color Mode” on

page 32.

2. Use the [S] and [T] keys to move the cursor to the setting you want,

and then press the [ENTER] key.

z This moves the

to item that is selected by the cursor, and applies the setting to the

image.

3. To close the setup screen, press the [ESC] or [COLOR MODE] key.

Using Color Mode (COLOR MODE)

1 ... 11 12 13 ... 78

No comments

Casio XJ-460 User Manual Page 12