Casio XJ-460 User Manual download pdf (Page 73)

Appendix

73

The projector does not

project any image from the

connected device.

The connected computer or video device may not

be turned on, or it may not be outputting a video

signal.

J Make sure the connected computer or video

device is turned on, and perform the required

operation on it to output a video signal.

—

The correct output source is not selected on the

projector.

J On the projector, select the input source that

corresponds to the device whose image you

are trying to project.

page 6

The projector does not

correctly project the image

from the connected device.

Images may not project correctly when you have

the component output terminal of a video device

connected to the RGB terminal of the projector.

J Try using the projector’s VIDEO input terminal

or S-VIDEO input terminal (see “Connecting to

a Standard Video Device”).

User’s

Guide

(Basic

Operation)

Images sent from a computer over an RGB cable

may not project correctly if [Component] is

selected for the “Input Settings J RGB Input”

menu setting.

J Turn off the projector and disconnect the AC

cord and RGB cable. Next, reconnect the AC

cord only and turn on power. Change the

“Input Settings J RGB Input” menu setting to

[RGB]. Try projecting again.

page 42

When RGB/Component is

selected as the input

source, the color of the

projected image or the

image itself is abnormal.

The settings configured on the setup menu’s

“Input Settings J RGB Input” menu may not be

compatible with the device connected to the RGB

input terminal.

J Use the setup menu to configure the “Input

Settings J RGB Input” menu settings to correct

the problem.

page 42

The projector keys to not

work.

Key lock or power on password may be turned

on.

J Turn off key lock and/or power on password.

page 47

Problem Cause and Recommended Action See

1 ... 72 73 74 75 76 77 78

Comments to this Manuals

No comments