Casio XJ-UT310WN Setup Guide download pdf (Page 36)

Wired LAN Connection Procedures

To use a LAN cable to connect a computer directly to the

projector

Connect the computer to the projector with the LAN cable.

Projector Operation

Press the [INPUT] key. This will display the “Input” dialog box.

Use the [T] and [S] keys to select “Network” and then press the [ENTER] key.

Check the IP address (“Server IP”) in the lower right corner of the LAN

connection standby screen.

z Here, we will use a projector IP address of 192.168.100.10 (projector initial default setting).

Computer Operation

Change the IP address of the computer to 192.168.100.XXX (XXX is a value from

1 to 9 or 11 to 254).

z The steps up to this point are to establish a LAN connection between the projector and

computer. The steps from here are for projecting the computer screen.

Start up Network Connection.

z The Network Connection window will appear with the message “Connecting”.

z If your computer is running Windows 7, 8 or 8.1 and the “Set Network Location” dialog box

appears, click [Cancel] to close the dialog box.

z A “Projector List” dialog box will appear as soon as Network Connection finds a projector to

connect to.

Click the IP address of the projector you want to connect with, and then click

[OK].

z For the projector’s IP address, check “Server IP” in the lower left corner of the projection

screen (LAN connection standby screen).

1 ... 35 36 37 ... 79

No comments

Casio XJ-UT310WN Setup Guide Page 36