Casio XJ-UT310WN Setup Guide download pdf (Page 44)

Remotely Controlling a Computer from a Smart Device

This section explains how to use a smart device for remote control of a computer running Network

Connection.

Important!

z To perform remote control operation described here, your smart device will need to have

C-Assist (page 76) installed on it.

To start PC remote

Perform one of the operations below to project computer screen contents via a

wireless LAN.

z “To use a projector simple connection SSID to establish a wireless LAN connection and

project” (page 12), steps 1 through 9

z “To use a projector generic SSID to establish a wireless LAN connection and project” (page

15), steps 1 through 11

z “To use a user SSID to establish a wireless LAN connection and project” (page 22), steps 1

through 11 (User SSID already created.)

On the smart device, start up C-Assist and then perform the steps below.

(1) Log in to the projector.

(2) Enter PC Remote standby.

On the Network Connection window, click the function menu button and then

click [PC Remote] on the menu that appears so there is a check mark next to it.

z This will cause an image of the computer screen to appear on the smart device’s touch

screen.

z The above indicates that you can use the smart device’s touch screen to perform computer

mouse operations. You can also use the smart device’s on-screen keyboard to input and edit

data on the computer.

Control the computer from the smart device as required.

To exit PC Remote

On the Network Connection window, click the function menu button and then click [PC Remote] on

the menu that appears to clear the check mark next to it.

1 ... 43 44 45 ... 79

No comments

Casio XJ-UT310WN Setup Guide Page 44