Casio XW-G1 User Manual Page 52
- Page / 111
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
16.3.15 crc : Cyclic Redundancy Check
Format: LSB 0aaaaaaaB
0bbbbbbaB
0cccccbbB
0ddddcccB
MSB 0000ddddB
CRC32 (in accordance with ISO 8802-3 or IEEE803.2 regulations) 32-bit value (ddddddddccccccc-
cbbbbbbbbaaaaaaaaB) calculated for the byte string from “MAN: Manufacturer’s ID” to the last byte of
“img: Parameter Set Memory Image” is stored in this “crc: Cyclic Redundancy Check”. The receiving
unit checks the value, and if it is not correct sends an error as a re-request.
16.3.16 EOX : End of System Exclusive Message
Format: 11110111B (F7H)
This is the End of System Exclusive Message status byte established by the MIDI standard.
17 Individual Parameter Operations
There are two parameter unit operations: Individual Parameter Transfer and Individual Parameter
Request. For one session, in response to an IPR (Individual Parameter Request) from an external
device, this Instrument returns an IPS (Individual Parameter Send) or the session is concluded when
the external device or this Instrument spontaneously sends an IPS. If this Instrument received an IPS,
the value of the applicable parameter is changed. Depending on the function of a parameter, Individual
Parameter Send may be used to issue a command to the Instrument and Individual Parameter Request
may be used to check Instrument status information.
Data Receiver Data Sender Operation
IPR → Send Request(Optional)
← IPS Data Transfer
18 Parameter Set Transfer
18.1 Communication Modes
18.1.1 One-way and Handshake
In order to ensure maximum speed for bulk dumping of Parameter Sets, the data format is different from
the data format used for Individual Parameter Send. Data is transferred as-is, using the Model’s memory
image. Parameter Sets can be transferred by bulk dump using the message exchange types described
below.
• One-way mode Parameter Set send/receive
• One-way mode Parameter Set send request send/receive
• Handshake mode Parameter Set send/receive
• Handshake mode Parameter Set send request, receive rejected, error notification send/receive
52
- XW-P1/XW-G1 1
- MIDI Implementation 1
- III System Message 39 3
- V Parameter List 63 3
- VI Parameter Set List 85 5
- VII DSP Parameter List 87 5
- MIDI Message Overview 9
- Channel Message 11
- 7 Control Change 12
- 7.2 Modulation (01H) 13
- 7.4 Data Entry (06H,26H) 13
- 7.5 Volume (07H) 13
- 7.6 Pan (0AH) 14
- 7.7 Expression (0BH) 14
- 7.9 Hold1 (40H) 15
- 7.11 Sostenuto (42H) 16
- 7.12 Soft (43H) 16
- 7.14 Filter Resonance(47H) 16
- 7.16 Release Time (48H) 17
- 7.18 Attack Time (49H) 17
- 7.20 Filter Cut Off (4AH) 18
- 7.23 Vibrato Rate (4CH) 19
- 7.25 Vibrato Depth (4DH) 19
- 7.27 Vibrato Delay (4EH) 20
- 7.37 Reverb Send (5BH) 23
- 7.38 Chorus Send (5DH) 23
- 7.39 NRPN (62H,63H) 23
- 、40H:User) 24
- 、Receive:Ignored) 25
- 7.40 RPN (64H,65H) 33
- 7.41 All Sound Off (78H) 35
- 7.43 All Notes Off (7BH) 35
- 7.44 Omni Off (7CH) 35
- 8 Program Change 36
- 9 Channel After Touch 37
- 10 Pitch Bend 37
- System Message 39
- 15 System Exclusive Message 40
- Messages 43
- 16.2 Basic Message Structure 44
- 16.3 Format of Each Field 44
- 18 Parameter Set Transfer 52
- Protocol Parameter” 58
- Parameter List 63
- 21 Patch Parameter 66
- 21.6 Master Tune Parameter 67
- 21.7 Master Mixer Parameter 67
- 21.8 Part Parameter 67
- 21.9 System Chorus Parameter 68
- 21.10 System Reverb Parameter 68
- 21.11 Patch Etc Parameter 68
- 22 Tone Parameter 69
- 23 Melody Parameter 70
- 24 Drum Parameter 70
- 24.3 LFO Parameter 71
- 25.1 Drawbar Parameter 71
- 26.2 Hex Layer LFO Parameter 72
- 27 Solo Synth Parameter 73
- 27.7 Solo Synth LFO (x2lfo) 78
- 27.8 Solo Synth PWM 79
- 27.9 Solo Synth Total Filter 79
- 28.2 User Wave LFO Parameter 80
- 29 DSP Parameter 81
- 30 All Data Parameter 81
- 31 Step Sequencer Parameter 82
- 33 Arpeggio Parameter 82
- 34 Phrase Parameter 82
- 35 Spec Parameter 82
- ↑ 1 01 00-00-01 0: Mono 84
- ↑ 1 01 00-01-01 0: 21kHz 84
- ↑ 1 01 00-00-01 0: Off 84
- 36.2 XW-G1 86
- DSP Parameter List 87
- 38 DSP Parameter Set Type 88
- 38.3 Solo Synth Distortion 89
- 38.4 Solo Synth Flanger 89
- 38.5 Solo Synth Chorus 89
- 38.6 Solo Synth Delay 89
- 38.13 Tremolo 91
- 38.14 Phaser 91
- 38.15 Flanger 91
- 38.16 Chorus 91
- 38.17 Delay 92
- 38.18 Reflection 92
- 38.19 Rotary 92
- 38.21 LoFi 93
- 38.22 Wah Compressor 93
- 38.23 Wah Distortion 93
- 38.20 Ring Modulator 93
- 38.24 Wah Chorus 94
- 38.25 Wah Flanger 94
- 38.26 Wah Reflection 94
- 38.27 Wah Tremolo 94
- 38.28 Wah Auto Pan 95
- 38.29 Compressor Wah 95
- 38.30 Compressor Distortion 95
- 38.31 Compressor Chorus 96
- 38.32 Compressor Flanger 96
- 38.33 Compressor Reflection 96
- 38.34 Compressor Tremolo 96
- 38.35 Compressor Auto Pan 96
- 38.36 Distortion Wah 97
- 38.37 Distortion Compressor 97
- 38.38 Distortion Chorus 97
- 38.39 Distortion Flanger 97
- 38.40 Distortion Reflection 98
- 38.41 Distortion Tremolo 98
- 38.42 Distortion Auto Pan 98
- 38.43 Chorus Reflection 98
- 38.44 Chorus Auto Pan 98
- 38.45 Flanger Reflection 99
- 38.46 Flanger Auto Pan 99
- 38.47 Reflection Distortion 100
- 38.48 Reflection Chorus 100
- 38.49 Reflection Auto Pan 100
- 38.50 Tremolo Distortion 100
- 38.51 Tremolo Chorus 100
- 38.52 Tremolo Flanger 101
- 38.53 Tremolo Reflection 101
- Part VIII 102
- 39 Setting Value Tables 102
- 39.5 Drawbar Position 設定値テーブル 103
- 39.8 0-3 Setting Value Table 103
- 39.9 0-5 Setting Value Table 103
- MIDI Implementation Notation 110
Related products and manuals for Synthesizer Casio XW-G1
Synthesizer Casio WK-7500 User Manual
(167 pages)
(167 pages)
Synthesizer Casio CTK-3200 User Manual
(48 pages)
(48 pages)
Synthesizer Casio XW-G1 Manual
(107 pages)
(107 pages)
Synthesizer Casio PX-300 User Manual
(38 pages)
(38 pages)
Synthesizer Casio CTK-6000 User Manual
(131 pages)
(131 pages)
Synthesizer Casio PX-500L User Manual
(39 pages)
(39 pages)
Synthesizer Casio XW-G1 User Manual
(111 pages)
(111 pages)
Synthesizer Casio LK-200S Manual
(58 pages)
(58 pages)
Synthesizer Casio CDP-135 User Manual
(22 pages)
(22 pages)
Synthesizer Casio PX-A800BN User Manual
(51 pages)
(51 pages)
Synthesizer Casio MZ-X500 User Manual
(57 pages)
(57 pages)
Synthesizer Casio PX-300 Handbook
(40 pages)
Synthesizer Casio PX-300 Manual
(40 pages)
(40 pages)
Synthesizer Casio PX-300 Handbook
(41 pages)
(41 pages)
Synthesizer Casio XW-P1 Manual
(95 pages)
(95 pages)
Synthesizer Casio XW-G1 Manual
(107 pages)
(107 pages)
© 2020, manymanuals.com. All rights reserved. | 1.314 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals