Casio XW-G1 User Manual download pdf (Page 37)

• Drum

This setting optimizes for drum sounds. The damper pedal does not function. The Hold1, Channel

Coarse Tune, and Master Coarse Tune messages are ignored if they are received.

• Drawbar(XW-P1 only)

This setting optimizes for drawbar tones. The damper pedal performs on/oﬀ operations.

• Hex Layer(XW-P1 only)

This setting optimizes for hex layer tones. The damper pedal performs on/oﬀ operations.

• Solo Synth

This setting optimizes for solo synth tones. The damper pedal performs on/oﬀ operations.

• User Wave(XW-G1 only)

This setting optimizes for user wave tones. The damper pedal performs on/oﬀ operations.

Performance Number/Step Sequencer Number Switching by Bank Select Message and

Program Change Message The bank select message and program change message can be used to

switch the performance number and/or sequencer number.

The change target can be switched by the bank select MSB. The change target is speciﬁed by the

program change number. The bank select LSB is ignored.

The following shows the relationship between the bank select MSB and the change target.

Change Target Bank Select MSB

Preset Performance 70H

User Performance 71H

Preset Step Sequencer 72H

User Step Sequencer 73H

When Perform NRPN and S.Seq NRPN are enabled by Instrument settings, number switching by

bank select and program change is ignored. For details about performance and the Step Sequencer, see

the User’s Guide.

9 Channel After Touch

Message Format: DnH vvH

n: MIDI Channel Number

vv: Value

Receive Receipt adds, to the tone being sounded, modulation of a depth sp eciﬁed by the value. In

the case of a tone that already has modulation applied, receipt of this message increases the modulation

depth. The modulation eﬀect diﬀers according to the tone being used.

10 Pitch Bend

Message Format: EnH llH mmH

n: MIDI Channel Number

ll: Value LSB

mm: Value MSB

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 110 111

No comments

Casio XW-G1 User Manual Page 37