Casio DT-9721CHGE Manual Page 10

  • Download
  • Add to my manuals
  • Print
  • Page
    / 45
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 9
10
Table 1.4 Descriptions of the parts
No. Name Description
1 SD Memory Card Slot Slot for inserting SD memory card.
2 Program Key (L) This key can be assigned any function available.
3 Roll Paper Holder Roll paper is placed in this holder. Use the optional Paper Holder when using
a formed sheet paper.
4 Splash Protect Cover
and Paper Cutter
Printed roll paper is torn off here. The paper cutter is provided with a splash
protect cover. Open the cover when printing. The paper cutter is revealed
when the cover is opened.
5 Power Key Press this key to turn the power on or off.
Indicator 1 (Left side) This indicator is green when charging the battery pack is completed and red
during charging.
6
Indicator 2 (Right
side)
This indicator flashes or lights according to the settings of the application
software installed in the terminal.
7 Speaker Generates audio and buzzer tones.
8 Brightness Sensor This sensor detects the brightness of the surroundings. The display backlight
and key backlight can be controlled automatically according to programmed
settings. Be careful not to inadvertently block this sensor.
9 LCD Panel/Touch
Screen
Displays text, operations, indicators and so forth. In addition, operations can
be performed and data can be input using the stylus provided.
10 Stroke Keys There are a total of 19 keys including function keys and numeric keys. Each
numeral and symbol on the key buttons is backlit.
11 8-pin Serial Interface
Connector
For connection of a bar code reader and so forth. Connect by opening the
connector cover.
12 Program Key (R) This key can be assigned any function available.
13 Power Jack The AC adaptor is connected to this jack when charging the lithium-ion
battery pack. Open the jack cover to connect the AC adaptor.
14 IR Port This is used for IR data communication with another terminal or with the
Bridge Satellite Cradle.
15 Battery Pack Cover
Lock Switch
Turn this switch when opening and closing the battery pack cover.
16 Battery Pack Cover Houses the battery pack inside.
17 PC Card Slot For connection of a separately sold PC card. Remove the cover to install a PC
card.
18 Hand Strap Hook Hook the hand strap here.
19 14-pin Serial Interface
Connector
Provided for future use.
20 Power Terminals Terminals for supplying power from the Bridge Satellite Cradle and
Cradle-type Battery Charger.
21 Neck Strap Hooks Hook the neck strap here.
22 Magnetic Card Reader Magnetic cards are read by passing through this magnetic card reader.
Remove the cover to use.
23 Reset Switch Press to reset the terminal. Be careful not to press by mistake.
24 Screen Protect Cover
Mounting
Remove the screws when attaching the Screen Protect Cover.
25 C-MOS Imager Reads 1D bar code symbologies and stacked 2D code symbologies.
(available on IT-3000M55E, IT-3000M55U, IT-3000M56U, and
IT-3000M56E only)
Page view 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 44 45

Comments to this Manuals

No comments