Casio KL-820 - Label Printer User's Guide download pdf (Page 32)

E-31

Part 14 Configuring the Printer Setup

The printer has a SET UP screen that you can use to configure a variety of

basic settings.

To configure the printer setup

1. Press ON/OFF to turn on the printer.

2. Press FUNC and then FORM (SET UP).

3. Use z and x to select the SET UP item whose setting you want to change,

and then press SET.

4. Use the cursor keys to change it.

When this setting

is selected:

DEFAULT FONT

CONTRAST

DENSITY

LANGUAGE

cm/inch

Change its setting like this:

• Use x and z to select the font you want to

use.

• Use c and v to adjust the display contrast.

• Use c and v to adjust the print density

setting.

• Use x and z to select the display language

you want to use.

• Use x and z to select centimeters (cm) or

inches as the unit of measurement.

5. Press SET to apply the setting.

Demo Printing

Demo printing uses built-in data to demonstrate the type of tape label printing

that can be performed by the printer.

Important!

• If there is label data from your last label layout session is still in memory,

performing a demo print will delete it. If you think you will need the data later,

save it in memory (page E-29) before performing a demo print.

1. Make sure a tape cartridge is loaded in the printer.

2. If the printer is on, press ON/OFF to turn it off.

3. Press ON/OFF to turn on the printer.

• If the message “[SET] TO RECALL” appears, press any key other than SET.

This will display a blank text input screen.

4. Press FUNC and then FORM (SET UP).

5. Use x and z to select DEMO PRINT, and then press SET.

6. Use x and z to select PRINT, and then press SET.

7. Confirm that 1 is specified for the number of copies.

• You can change the number of copies if you want.

8. Press SET to start printing.

• The demo print contents depend on the width of the tape cartridge currently

loaded in the printer.

9. After printing is complete, use x and z to select EXIT, and then press

SET.

.In response to the confirmation message that appears, press SET.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 44 45

Comments to this Manuals

No comments

Casio KL-820 - Label Printer User's Guide Page 32

Comments to this Manuals

Related products and manuals for Label printers Casio KL-820 - Label Printer