Casio PX-310 User Manual download pdf (Page 34)

34

15.2.12 12...sum Check Sum

This field is always empty.

In this case, the "sum" field contains a value, which, when added to the total value of the "data" field, makes the

lower seven bits 0.

The receiving side checks if this is true, and performs error handling (re-request, etc.) if it is not.

15.2.13 14...EOX : End of System Exclusive Message

(End of System Exclusive message Status = F7H)

16 Parameter Unit Operations

There are two parameter unit operations: Individual Parameter Transfer and Individual Parameter Request.

For one session, in response to an IPR (Individual Parameter Request) from an external device, this Instrument

returns an IPC (Individual Parameter Change) or the session is concluded when the external device or this

Instrument spontaneously sends an IPC. If this Instrument received an IPC, the value of the applicable parameter is

changed.

An Individual Parameter Change can also be used to issue some command to the Instrument, and the Individual

Parameter Request can be used to check Instrument status information.

See "Part V Parameter List" for information about how parameters can actually be sent.

When act = 00(IPC), 01(IPR), 03(BDR), 05(HDR) or 7(EOD, HDA, HDJ, HDE, BSY, EOS, NOP)

Format: -

When act = 02(BDS) or 04(HDS)

Format: 0sssssssB

Format: 11110111B

Data Receiver Data Sender Operation

IPR → Send Request (Optional)

← IPC Data Transfer

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 64 65

Comments to this Manuals

No comments