Casio XJ-450 User's Guide download pdf (Page 41)

Getting Ready

Before performing any of the operations in this section, make sure you first set up the

projector (page 30) and connect to an output device (pages 37 to 40).

AC Power Cord Precautions

z Make sure that you use a power source with the same voltage as that specified for the

projector.

z Do not share the outlet supplying power to the projector with other devices. If you are

using an extension cord, make sure that the ampere rating of the extension cord is

compatible with the power consumption value of this projector.

z Never use the power cord while it is still bundled together.

z Never place objects on top of the power cord and do not step on it.

z Never pull on the power cord. When unplugging it, grasp the plug.

z Use a conveniently located power outlet that you can reach easily when you need to

unplug the projector.

z If you need more information about the power supply, contact your original dealer or

authorized CASIO service center.

To turn on the projector

1. Use the bundled AC power cord to plug the projector into a power

outlet.

z Plugging into a power outlet causes the three indicators on the top of the projector to

light amber. After a short while, two of the indicators will go out and only the POWER/

STANDBY indicator will remain lit amber, which indicates the standby state.

z Note that the projector will not turn on if you press the [ ] (power) key while all three

indicators are lit amber. Wait until the projector is in the standby state before trying to

turn it on.

Turning On the Projector

Bundled AC power cord

The shape of the plug depends

on your geographical area.

Power supply connector

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 129 130

No comments

Casio XJ-450 User's Guide Page 41