Casio KL-750 User Manual download pdf (Page 12)

E-11

Text Effects

There are three text effects that you can assign: shading, underlining, and boxed

text. The following shows examples of each.

Shading:

Underlining:

Boxed Text:

Text effect changes are applied to printed text only. The appearance of the

displayed text does not change, but the text effect indicators will show you

when a text effect is being used.

Important!

• Any text effect specification you make is applied to all the characters on the

display. You cannot make multiple specifications for specific characters.

To specify a text effect

Example: To shade the text “ABXYZ”.

1. Input the text.

2. Press FUNCTION 3 (EFFECT) to display a menu of text effects.

–

3. Use H and J to move the cursor to the effect you want to use.

4. When the cursor is located under the effect you

want to specify, press SET to select it and re-

turn to the text display.

Note

• You could also perform the above procedure in reverse, specifying the text

effect first and then inputting the text.

Part 6 Printing

This part of the manual includes all the information you need to print tapes. It

also tells you how to print special stamp tapes that you can attach to an optional

stamp holder to create your own original stamps.

Printing Precautions

• Never turn power off while printing is being performed.

• Make sure that the tape outlet is not blocked before you start printing.

• Never operate the tape cutter while printer is being performed (indicated by

the message “PRNT” on the display).

• During printing at very high density, printing of very long text, or repeat print-

ing of the same text a number of times, the Label Printer may stop printing for

about five seconds. This is not a malfunction, and normal printing should

resume shortly (indicated by the message “P R N T” on the display).

Printing a Tape

Printing a tape is as easy as pressing the PRINT key.

To print a tape

1. Press the PRINT key to print a tape of the text you have input and laid out.

• To stop a print operation that is in progress, press ESC.

2. After the print operation is complete, press down on the tape cutter lever to

cut the tape.

3. Use scissors to trim the tape to the size you want, if necessary.

• After you print a tape, you can peel off its paper

backing and stick the tape onto the object you

want. Note that the tape will not stick on coarse,

wet, oily, or soiled surfaces. Also, you should not

try to use the tape where it is exposed to direct

sunlight or rain. Do not stick the tape onto hu-

man skin.

• An easy way to remove the backing from a tape

and expose the adhesive surface is to bend the

tape near one of its ends. This should cause the

tape and its backing to separate, allowing you to

pull them apart.

Tape

Backing

Box

Underline

Normal (no effects)

Shading

Cursor

XYZ

1 ... 11 12 13 14 15 16 17 18 19

Comments to this Manuals

No comments

Casio KL-750 User Manual Page 12

Comments to this Manuals

Related products and manuals for Calculators, organizers Casio KL-750