Casio EX-FC200S User Manual download pdf (Page 111)

111

Viewing Snapshots and Movies

Use a commercially available HDMI cable to

connect the camera to the TV. For information

about playback, see the procedure starting

from step 2 under “Viewing Snapshots and

Movies on a TV Screen” on page 109.

• Use a commercially available HDMI cable that is marked with the logo shown to the

right.

IMPORTANT!

• Output to a TV is not supported while the camera is in the REC mode.

NOTE

• Use a HDMI cable that with a plug that is compatible with the camera’s HDMI mini

connector on one end, and a plug that is compatible with your TV’s HDMI

connector on the other end.

• Proper image and/or audio output and other operations may not be possible with

some devices.

• Connecting the camera to the HDMI connector of another device can damage both

the camera and the other device. Never connect two HDMI output connectors to

each other.

• Make sure that the camera is turned off before plugging in or unplugging the cable.

Check the user documentation that comes with the TV for information about

requirements before plugging into or unplugging from the TV.

• When cables are connected to both the USB/AV port and the HDMI output

connector, the HDMI output connector connection is given priority.

• Disconnect the HDMI cable when you are not using HDMI output. The camera’s

monitor screen may not operate normally while the HDMI cable is connected.

• Audio is stereo.

• Audio is initially output by the camera at maximum volume. When you first start

displaying images, set the TV volume control at a relatively low level and then

adjust it as required.

Viewing High-quality Movies on a Hi-Vision Television

HDMI connector

HDMI cable (commercially available)

HDMI mini connector

HDMI input

HDMI output (Mini)

Terminal cover

1 ... 110 111 112 ... 195

No comments

Casio EX-FC200S User Manual Page 111