Casio EX-FC200S User Manual download pdf (Page 112)

112

Viewing Snapshots and Movies

. Selecting the HDMI Terminal Output Method (HDMI Output)

Procedure

[MENU] * Set Up Tab * HDMI Output

Use this setting to select the digital signal format when connecting to a TV with an

HDMI cable.

* 1080i corresponds to 1080 60i, but not 1080 50i. Because of this, the required output

method may be 576p when outputting to a digital TV in a PAL reception area that does

not support 1080i 60i. If you are in a PAL reception area and nothing is displayed

automatically, change the setting to 576p.

• If an image does not appear when “Auto” is selected as the output method, try

changing this setting to something else.

IMPORTANT!

• The “HDMI Output” setting cannot be changed as long as there is an HDMI cable

connection between the camera and a TV. Disconnect the HDMI cable from the

camera to change the “HDMI Output” setting.

Recording Camera Images to a DVD Recorder or Video Deck

Use the following method to connect the camera to the recording device using the AV

cable (option).

– DVD recorder or video deck: Connect the AV cable to the VIDEO IN and AUDIO IN

terminals.

– Camera: Connect the AV cable to the USB/AV port.

You can play a slideshow of snapshots and movies on the camera and record it on a

DVD or video tape. You can record movies by selecting “» Only” for the slideshow

“Images” setting (page 113).

For information about connecting a monitor to the recording device and about how to

record, see the user documentation that comes with the recording device you are

using.

Auto

This setting will cause the format to change automatically in accordance

with the connected TV. Normally, you should use this mode.

1080i 1080i format output*

480p 480p format output

576p 576p format output

1 ... 111 112 113 ... 195

No comments

Casio EX-FC200S User Manual Page 112