Casio EX-FC200S User Manual download pdf (Page 88)

Advanced Settings

To focus with manual focus

1. On the monitor screen, compose the image so

the subject you want to focus on is within the

yellow boundary.

2. Watching the image on the monitor screen use

[4] and [6] to adjust focus.

• At this time the image that is within the boundary

will enlarge and fill the monitor screen, which aids

in focusing. If you do not perform any operation for

two seconds while the enlarged image is displayed,

the screen in step 1 will re-appear.

NOTE

• An Auto Macro feature detects how far the subject is from the lens and

automatically selects either Macro Focus or Auto Focus accordingly.

• Use of the flash together with Macro Focus can cause the light of the flash to

become blocked, which may result in unwanted lens shadows in your image.

• In the case of movie recording, Auto Macro operates before you start recording.

After recording is started, however, focus is fixed.

• Whenever you perform an optical zoom operation while shooting with Auto Focus,

Macro Focus, or Manual Focus, a value will appear on the monitor screen to tell

you the focus range, as shown below. Note that the focus range is displayed

including the Auto Macro range only when shooting with Auto Focus.

Example: oo cm to 9

* oo is the actual focusing range value.

• The operations assigned to the [4] and [6] keys with the “L/R Key” setting (page

95) are disabled while Manual Focus is selected as the focus mode.

• Turning on “Face Detection” causes the focus mode to change automatically to Q

(Auto Focus). Changing the focus mode setting to anything other than Q (Auto

Focus) causes “Face Detection” to turn off automatically.

Yellow boundary

1 ... 87 88 89 ... 195

No comments

Casio EX-FC200S User Manual Page 88