Casio EX-FC200S User Manual download pdf (Page 140)

140

Using the Camera with a Computer

4. Turn off the camera and then use the USB cable that comes with the

camera to connect it to your computer.

The camera will turn on automatically and battery charging will start (page 19).

• The camera may not turn on automatically in the case of certain computer

models or connection conditions. If this happens, press [ON/OFF] (Power) to

turn on the camera.

• Make sure that you insert the cable connector into the USB/AV port until you

feel it click securely into place. Failure to insert the connector fully can result in

poor communication or malfunction.

• Note that even while the connector is fully inserted, you

still will be able to see the metal part of the connector as

shown in the illustration.

• When connecting the USB cable to a USB port, make

sure you align the connector correctly with the port.

• Your computer may not be able to recognize the camera

if you connect via a USB hub. Always connect directly to

the computer’s USB port.

• The first time you connect the camera to your computer with the USB cable, an

error message may appear on your computer. If this happens, disconnect and

then reconnect the USB cable.

5. Windows 7 / Windows Vista users: Click “Start” and then “Computer”.

Windows XP users: Click “Start” and then “My Computer”.

6. Double-click “Removable Disk”.

• Your computer recognizes the memory card loaded in the camera (or built-in

memory if there is no card) as a removable disk.

7. Right-click the “DCIM” folder.

USB port

USB cable (included with camera)

Making sure that the 6 mark on the camera is aligned

with the 4 mark of the USB cable connector, connect

the cable to the camera.

[USB/AV] port

Large connector

Small connector

Terminal

cover

1 ... 139 140 141 ... 195

No comments

Casio EX-FC200S User Manual Page 140