Casio XJ-UT310WN Setup Guide download pdf (Page 12)

Using a Projector Built-in SSID (Simple or Generic) to Establish

a Wireless LAN Connection

This section explains how to use Network Connection to search for a projector built-in SSID (simple or

generic) and establish a wireless LAN connection between the projector and computer. The

operations described here establish a wireless LAN connection between the projector and computer

and start projection of the computer screen.

To use a projector simple connection SSID to establish a

wireless LAN connection and project

Projector Operation

Connect the wireless adapter to the projector (page 10) and then turn on the

projector.

z The input source will automatically switch to “Network” and projection of the LAN connection

standby screen will start.

z If projection of the LAN connection standby screen does not start, press the [INPUT] key. On

the “Input” dialog box that appears, use the [T] and [S] keys to select “Network” and then

press the [ENTER] key.

Press the [MENU] key and then select the following: “Network Settings” 3

“Projector Wireless LAN Settings” 3 “SSID”. On the dialog box that appears,

select one of the following: casiolpj0001, casiolpj0002, casiolpj0003, or

casiolpj0004.

Press the [ESC] key twice to return to “Network Settings”.

Use the [T] key to select “Update Network Settings” and then press the [ENTER]

key.

z This will display a confirmation dialog box asking if you want to update network settings.

Press the [S] key to select “Yes”, and then press the [ENTER] key.

z This applies the SSID change to the projector and closes the dialog box. Wait until the LAN

connection standby screen starts to be projected again.

z If multiple projectors are in use nearby, select a separate SSID for each projector.

Wireless LAN connection

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 78 79

No comments

Casio XJ-UT310WN Setup Guide Page 12