R-18
Hardware Configuration
1-8. Optional peripherals
The following optional peripherals can be used by plugging them into the appropriate port.
1) Personal computer / MODEM: RS-232C COM 1 port
2) Scanner: RS-232C COM 2 port
Hand-held scanner (HHS-15)
3) Remote display: RS-232C COM 3 port
QT-2163D
4) Remote printer (UP-350, UP-250) or Slip printer (SP-1300): RS-232C COM 2 ~ 4 port
The remote printer is used for reports/kitchen orders/receipts.
If you use one remote printer, connect it to COM 4 port.
If you use two remote printers, connect remote printer 1 to COM 4 port and remote
printer 2 to COM 2 or 3 port. (Connecting remote printer to COM 2 port requires I/O
parameter programming. Refer to page 65 of the programming manual.)
The slip printer is used for validations, detailed slips, endorsements and check prints.
If you do not connect HHS-15 to COM 2 port, connect SP-1300 to COM 2 port.
(Connecting slip printer to COM 3 or 4 port requires I/O parameter programming. Refer
to page 65 of the programming manual.)
6) Inline: Inline port
You can use either CASIO original cable (same as QT-2100) or CAT5 UTP cable.
7) Drawer: drawer port
www.cashregisters.net
Comments to this Manuals