Casio FX-7400GII User Manual download pdf (Page 421)

u To configure a Data Logger setup using Setup Wizard

Before getting started...

• Before starting the procedure below, make sure you first decide if you want to start

sampling immediately using the setup you configure with Setup Wizard, or if you want to

store the setup for later sampling.

• See sections 6-1, 7-1, and 8-1 of this chapter (E-CON3 Application) for information about

procedures required to start sampling and to store a setup. We recommend that you read

through the entire procedure first, referencing the other sections and pages as noted,

before actually trying to perform it.

• To terminate Setup Wizard part way through and cancel the setup, press !J(QUIT).

1. Display the E-CON3 main menu (page 1-1).

2. Press 1(SET) and then 1(WIZ).

• This launches the Setup Wizard and displays the “Select Sensor” screen.

3. Press one of the following function keys to specify the manufacturer of the sensor you are

using for measurement: 1(CASIO), 2(VERNIER), 3(CMA).

• Pressing either key will display the corresponding sensor list.

4. Specify the sensor you want to use.

Use the f and c cursor keys to move the highlighting to the sensor you want to use,

and then press w.

• If the sensor you specified has more than one option (more detailed specifications, such

as sampling unit, mode, etc.), an option list will appear on the display at this time. If this

happens, advance to step 5.

• If the “Input Total Sampling Interval” screen appears, skip to step 6.

5. Select the options for the sensor you specified in step 4.

Use the f and c cursor keys to move the highlighting to the option you want to select,

and then press w.

• If the “Input Total Sampling Interval” screen appears, advance to step 6.

Important!

When special settings are required by the sensor and/or option you select, other screens

other than the “Input Total Sampling Interval” screen will appear on the display. The

following shows where you should go to find information about the operations you need to

perform for each sensor/option selection.

2-2

Using the Setup Wizard

1 ... 420 421 422 ... 483

No comments

Casio FX-7400GII User Manual Page 421